Carbon fiber selancar hydrofoil wings air untuk kiteboards windboards

Ketersediaan: Stok tersedia

SKU: t949

Rp6 102 517 Rp5 797 391

Jumlah:

100% carbon fiber selancar hydrofoil wings air untuk foil kiteboard dan windboards

KAMI HYDROFOIL LEBIH PROFESIONAL, 98CM TIANG DAN FOIL DESAIN YANG MUDAH UNTUK MENGUBAH.

INI ADALAH REAL CARBON FIBER HYDROFOIL. TIDAK ADA ALUMIMUM DALAM!!

terpadu "T" bar, sangat kuat!!

bahan: serat karbon dan sekrup aksesoris

ukuran sekitar: tinggi: 98 cm( bisa dipotong lebih pendek sesuai dengan kebutuhan anda ), sayap depan:62cm, sayap belakang: 37cm panjang

sayap depan lebar: 112mm; sayap belakang lebar: 71mm

net berat sekitar 3 kg

JANGAN MENGGUNAKAN FOIL INI RAMAI DI LAUT!!

PEMBELI MENUNJUKKAN:

PACKING:

Nomor Model JNJ8801Nama Merek JNJJenis KiteboardsKegiatan Outdoor SurfingOrang-Orang Berlaku Unisex

Tag: air surf, sayap sayap, wing karbon, Air murah surf, Kualitas tinggi sayap sayap, China wing karbon Pemasok.

Bragantini	2017-10-18
very well packaged to awoid any damage during transport. fast shipment and good information from seller. impressed with the quallity and finnish of the foil, real good craftmanship.

Irinach1971	2017-11-28
First of all, the quality of the laminate seems to be very good. Maybe the only downside regarding this is that the finish seems to be normal clear resin, so you should be careful with the surface (scratches, etc). Weight of the fuselage+wings+nuts = 3285 grams. Weight of the plate: 281 grams. The reason I gave it 3 stars is the following. Despite the good quality of the laminate, the fastening system is far from perfect. The holes are around 1.5 mm off the center and misaligned. Another issue I had with the holes is that the package was mistreated by the postal service (you can see in the pic that the tail went through the box) and the fuselage is now cracked from the tail until the hole of the last bolt (5 mm crack, see pic). I hope it does not affect the structural integrity. All in all i recommend the product for the price paid, but be prepared to sand a bit (using a dremel) and apply some epoxy, both for the corrected holes and to fix the mast with the base.

Tulis komentar Anda

Rating

Kirim